Näytetään tekstit, joissa on tunniste welding. Näytä kaikki tekstit
Näytetään tekstit, joissa on tunniste welding. Näytä kaikki tekstit

torstai 9. marraskuuta 2017

Helsinki-pietarsaari-helsinki






Had to drive v8 the 66 Dodge Pick-Up, from the cottage to Ojakkala, to my brothers place, so that we can put it on a trailer and head to the Pori City (around 245 km from my apartment). The Dodge had problems to over charge with 16.18 volts... but because it was getting dark, the alternator worked differently. I got around 10 volts... heh. So i had to drive without the lights part of the trip to have some electric to ignite the fuel. :-( i got to my brothers yard, and there it stopped, But it was exciting. that little red express truck goes pretty good. and after the electrical problems has been solved i would expect even more "rapid transit" :-) heck, i don't know the engine size, but in the tittle it is 5.6 liters, but i would guess that its a 5.2. maybe it will be better identified later on.


1. we got to the Pori and left the Dodge to a Mopar enthusiast place to get some treatment...
then we headed to M.Koivisto´s (a professional welder and a race-vw-pervert) garage. some 126 km away.





2. We picked up my 86x101.6 block and other stroker parts...and checked the ultra cool garage and projects that are going on... its always nice to see whats going on and talk to the guys that really know their stuff. Mikko has this race vw with type 1 - 2,8 liters 10 sec engine... that used to be Tomi Seppäläs old street engine. it still looked awesome. this combo is for sale if you have spare money...









3. after this we headed to pietarsaari (some 177 km away) ...there we met a nice vw-guy,
mr. Tom Lundberg.
One of the fellow travelers, Hasse Holmström had difficulties to see in the darkness, because he wanted to buy this vw type-4 variant. heh, some kind of "flintstones 412 model". Ok, this is the bonneville special model - theres no wind resistance, the air flows through the car ...easily. :-)
or maybe this is the crotch cooler maximum model? and this car had to be wrapped, so that the loose parts don't drop... :-) good luck with the project.


4. mr T. Lundberg has a beautiful house with lots of nice old stuff, and loads of old vw´s and who knows, maybe we will go for a third time for coffee and some awesome apple pie.
thanks again. it was a great time with you guys!



5. the wrapped up "condom-wagen" emptied its guts to Isojoki city, and after that ended to a garage in veikkola. huh, i took my parts to helsinki city...and they are still in the car. :-) I'm still a bit tired of the trip... :-)






perjantai 11. elokuuta 2017

cb bubbletop block converion

Well sometimes progresscomes suddenly, like this cb block modification. Mikko Koivisto (http://www.mikkokoivisto.fi) welded some material to my blind cb-block so that i could use 101.6 cylinders, i already have an aircooled.fi 86mm crank. looks pretty cool & should be a great base for turbo ghia or a street racer panel van. who knows. but should be more than 2.7 liters of fury.




torstai 3. huhtikuuta 2014

You need some welding? Autopelti hytöset oy

Well a new GOOD contact for me was this autopelti hytöset, in konala (helsinki)! 
The inspector found a rust spot In the panelvan from the bottom, (check the picture) and due to the lack of welding equipment, i asked the job from this company... They promised to do it fast, and for the right price... so now the panelvan is ready for the inspector for that part!

Have to say that the guy behind the desk has many old vw's so its a safe place to take your vw.
Thanks for the good job!

sunnuntai 8. joulukuuta 2013

Ugly duckling - karmann ghia

The cosmetic surgery for the ghia started at m. Sarkelas garage at mantsala city, and as we thought the ghia needs a bit of tin work ;-) but its at the good hands of welding wizard mika. This ghia was bought from texas, couple of years ago, and i have to admit that they know the art of "bondoing" :-) the body has a lot of bondo, aluminium tape, screws, awfull tin repairs, and rust... But theres also positive stuff, under the bondo layers, anyways, the layout for the "bond-shell"
Is something that only frankenstein would love, as a car... Lets see how it turns out.
:-) great ideas are coming to my mind... But check out this blog for more...














maanantai 5. syyskuuta 2011