Ok so far what i know, is that the tube with the bow leaks a tiny bit of air, as i changed it to a straight pipe without welds or any BOW. now the tubes from the turbo to the end of intercooler is ok for me. BUT, today i tested the part from intercooler to the T-inatkemanifold, AND couldn't get any pressure to that. so the leak must be massive. i took it out of the ghia, as i want to get a better view what can be done, or is it useless... looks like the culprit is the china-throttle body. as it was before too. but i have to test it before I'm sure. IF the manifold setup is good from the T-shaped manifold, this thing could be running better one day. It was around -5 degree Celsius today, so my fingers were frozen in this hobby. i should get it to a warm garage, but there's ice and snow so picking up the ghia is not possible right now.
Ei kommentteja:
Lähetä kommentti