oxyboxer update 2

some parts that i already had, now in need...

45 idf throttle body

a spare wbx-longblock is good for the try-outs

oil feed-line for the turbo. 

for the oiling, i just need a 90 degree part and that is ready then.

had to remove the oil filler tube from the wasser block

type 1 hide-a-way header

here you can see the difference of the 

wbx and the typ1

exhaust flange for the 3 & 4 cylinder

there's gonna be the oil drain location

here i have to get a 90 degree an-fitting from the turbo

a tight bend, but might be good this week

have to have a welder to make correct parts in here.

and a thermal sock for the hose too.

hot place, but i will fix some thermotec or similar

have to check the angle to the block too, so that its always descending

had to change the throttle bore 

to the oxyboxer too, looks promising, but needs some gaskets...

stay tuned...

 

some upgrade at the garage...

 cutting, grinding, fitting, and  cutting, grinding, fitting, 

well getting somewhere anyways. looks better, but the throttle bores are still missing.

and the header for the turbo won't fit with that massive oil pump. 

and this turbo engine is a 76x94 oxyboxer

this on is a 2332cc basic stroker

oxyboxer update

I started to cut the china tin to fit the oxyboxer, 

and as i haven't done this before, i was a bit scared.

but looks like things might work.

and while waiting for the dual throttle bores, 

i used the carbs to mock up the plenum etc. 

now i will do the other side and 

check for the other turbo parts too.